SX-CAN JLR Engineering Tool for Jaguar Land Rover CAN Bus Vehicles
- Vehicle reset,
- Learning module VIN,
- Read module information,
- Fuel pump activation,
- Fuel pump lifting – diesel,
- Filling the fuel, system – gasoline,
- The water pump on,
- AdBlue/DEF Check,
- Reset selective catalytic,
- reduction start inhibit (AdBlue/DEF resetting),
- Steering gear configuration, Clear, engine adaptation values,
- GPF regeneration, Release factory speed limit,
- Reset Maintenance Reminder, Replace the battery,
- Replace the tire pressure sensor,
- BCM Unprotection, Gateway initialization,
- Reset Valet Parking, Release transportation mode,
- EVA1 repair AAM,
- TCU activation for remote communication
- Many more…
Manufacturing Year Functions Support
- MY 2006-2013 vehicle diagnostic, more master functions to be updated
- MY 2013-2019 vehicles, like Anti-theft key programming, all keys lost programming, mileage adjustment, ccf parameters coding, ECU flash, and IMC infotainment flashing.
Why the SX-CAN tool?
- JLR SDD 164 stopped and SDD 165 online ONLY and the JLR Pathfinder v374 has stopped updating and many features can’t be utilized.
- SX-CAN supports MY2013-2019 vehicles with all Pathfinder functions in an easy-to-operate JLR engineers’ way of coding programming, the used ECU programming, calibration, keys, and immobilizer features. IMC firmware upgrades, IPC cluster programming, and many OEM retrofit upgrade projects.
- SX-CAN supports MY2006-2013 vehicles diagnostic and with the coming updates with more features.
- A valued tool with a cash cow generates like the JLR SX-TOOL for DOIP vehicles.
What is the difference between SX-CAN and SX-TOOL?
- SX-CAN has supported JLR CAN BUS vehicles since MY2006-2019
- SX-TOOL master tool supports JLR DOIP vehicles from MY2017-2025
CCF Flashing and Memory Functions
Anti-theft Modules Synchronization
ECU Modules Calibration
SX-CAN Vehicles Support 092024
- 15-16 Discovery 4
- 14-16 Range Rover Range Rover Sport
- 15-19 Evoque
- 14-16 Jaguar XJ
- 14-16 Fpace X761
- 14-16 XEL
- 14-19 Epace
Tested and proved to support Anti-theft key programming, all keys lost programming, mileage adjustment, ccf parameters coding, ECU flash, and IMC infotainment flashing - If your laptop system USB drivers are installed, you can select a device from the VCI list and test it with the car like the below picture.
SX-CAN Interface / Device to work with
- JLR DOIP
- DA DOIP
- DA VCI USB Dongle
- Mongoose Pasthru OEM device
- Openport 2.0
- Bosch J2534 devices
- Autel Passthru VCI
- Launch Passthru VCI
- Many more… for aftermarket J2534 pass-thru devices, please install the manufacturer’s USB driver and test on your own.
- For JLR MY2006-2013 diagnostic support, the majority of updates are needed for CCF edit, IVS flashing, and many other vehicle operations. contact us if you’re uncertain.
More products about our JLR Engineering tools
- JET Master (SX-TOOL) full diag. coding. programming, keys programming
- JET-PRO diag. coding
- JET LS locksmith for keys programming and all keys lost programming
- CCF-PRO VBF editor 2006-2024 vehicles
- INSTRUMENTE CCF 4.9 for DOIP vehicles
Recenzii
Nu există recenzii până acum.